Back to all

Why Is My Check Engine Light On?

January 8, 2017

The Check Engine Light strikes fear into the hearts of some Grand Rapids drivers, and is totally ignored by just as many. Just what it means is a mystery to most people.


Let's get the urgency issues out of the way first. If your Check Engine light is flashing, that means that something is wrong that could cause engine damage. Naturally, you need to get that taken care of right away. If your check engine light is flashing, you shouldn't drive at high speeds, tow or haul heavy loads. Take it easy all the way to your Grand Rapids service center.

drive

If the light is glowing steadily, you should keep an eye on it for a day or two. If the light doesn't go off, schedule an appointment with your friendly and knowledgeable pros at Tuffy Grand Rapids to get it checked out.

Some more information on how the Check Engine light works may be helpful for Grand Rapids drivers. Most of your engine functions are controlled by a computer, not surprisingly, called an engine control computer. The computer is able to adjust many engine parameters for environmental conditions, engine condition and even the way you drive.

In order to make these adjustments, the computer relies on a network of sensors to provide data. The computer knows the proper operating range for each sensor. When a sensor reading is out of range, the computer runs some tests and may turn on the vehicle's Check Engine light.

A simple example is a loose or missing gas cap. This may cause one of the sensors to read out of range. The computer doesn't know if it's a serious condition that caused the reading or just a loose gas cap, so it stores a trouble code and turns on the Check Engine light.

Now when you tighten up the gas cap, the sensor readings will be in the correct range. The computer will keep checking on the report for a day or two. Since a bad reading didn't come up again, it turns off the Check Engine light. The computer will also try to make adjustments to compensate for some readings. If it can do so, it'll then turn off the Check Engine light.

If the problem can't be resolved then the light will remain on, and you should get your vehicle looked at. Your friendly and knowledgeable pros at Tuffy Grand Rapids will plug a scanner into the on-board diagnostic port and read the trouble code stored in the computer. The trouble code will give the technician a starting place as he diagnoses the cause of the problem.

 

Tuffy Grand Rapids
610 28th St. SE
Grand Rapids, Michigan 49548
616.452.4425

More articles from Tuffy Grand Rapids (28th St.)

Straight to the Point (Alignment Signs of Problems)

March 24, 2024

Its just common sense that your vehicle will drive better if all the wheels are lined up with each other and the road the way the engineers intended. When theyre not, that is called being out of alignment. Here are some signs that your alignment has problems. Your steering wheel isnt straight... More

Not-So-Common Sense (Sensor Failures)

March 17, 2024

So your vehicle won't start. What's the first thing that comes to mind? Battery dead? Starter motor worn out? Out of gas? Well, those are all reasons that make sense. But your vehicle may be refusing to start because one of its computers is being warned that to do so might damage it. Here's ... More

Losing Your Cool (Why is My Air Conditioning System Not Working?)

March 10, 2024

When you turn on the air conditioning in your vehicle, you expect cool air to come out of the vents. You depend on it, especially in hot weather, but it can also be important in humid weather when you need it to help defrost your windows and windshield. The air conditioning system has a lot of p... More